xcalcs
Suchergebnisse
Ihre Suche nach " cylinder " zurückgegeben die folgenden Blätter:
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Pressure stresses per BS5500 G.2.3.5.2(a): (radial load should not include pressure end load)
Required thickness of conical shells: under internal pressure: Calculation based on inside diameter
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter
Two cylinders in contact under load: parallel axes: Hertz's theory
Cylinder in contact in a cylindrical socket under load: Hertz's theory
Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure
Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter
Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53
Minimum thickness of: torispherical ends: under internal pressure
Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius
Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Minimum thickness of: ellipsoidal ends: under internal pressure
Two cylinders in contact under load: axes at right angles: Hertz's theory
Cylinder in contact on a flat plate under load: Hertz's theory
Required thickness of conical shells: under internal pressure: Calculation based on outside diameter
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius
Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53

 <-Vergessen?
Anmelden
Beispiel (durch Zufall)
Bibliothek (1554)
Träger (527)
Rahmen (239)
Bögen (285)
Pipes (90)
Platten (299)
Vessels (69)
Stability (30)
Versch. (15)
Finden
Info/Neuh.
Zu uns schreiben
Anmelden
Anregung
Technische Unterstützung
Administrativ
Wer wir sind

PREXCO srl
Via Primo Maggio, 10
I-46030 S.GIORGIO DI MANTOVA
Tel+39 03761536542
skype:prexco

Wenn Sie fortfahren diese Seite zu nutzen, nehmen wir an, dass Sie die Verwendung von Cookies zu statistischen Zwecken und Benutzerfreundlichkeit akzeptieren. Um mehr zu erfahren. EU-Richtlinie