Search results
Your search for "
cylinder
" returned the following sheets:
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter
Two cylinders in contact under load: parallel axes: Hertz's theory
Cylinder in contact in a cylindrical socket under load: Hertz's theory
Cylindrical vessel: vertical: with two ellipsoidal heads: filled volume: as a function of content height
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter
Cylindrical vessel: vertical: with two hemispherical heads: filled volume: as a function of content height
Cylindrical storage bin: with bottom cone: with flat top head: filled volume: as a function of content height
Cylindrical vessel: horizontal: with two torispherical heads: filled volume: as a function of content height
Cylindrical vessel: sloped: with two torispherical heads: filled volume: as a function of content height
Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure
Cylindrical vessel: vertical: with two spherically dished heads: filled volume: as a function of content height
Cylindrical vessel: sloped: with two hemispherical heads: filled volume: as a function of content height
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius
Minimum thickness of: ellipsoidal ends: under internal pressure
Cylinder in contact on a flat plate under load: Hertz's theory
Cylindrical vessel: sloped: with two ellipsoidal heads: filled volume: as a function of content height
Required thickness of conical shells: under internal pressure: Calculation based on outside diameter
Cylindrical vessel: horizontal: with two hemispherical heads: filled volume: as a function of content height
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection
Cylindrical vessel: sloped: with two spherically dished heads: filled volume: as a function of content height
Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53
Cylindrical vessel: horizontal: with two ellipsoidal heads: filled volume: as a function of content height
Required thickness of conical shells: under internal pressure: Calculation based on inside diameter
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Pressure stresses per BS5500 G.2.3.5.2(a): (radial load should not include pressure end load)
Cylindrical vessel: horizontal: with two spherically dished heads: filled volume: as a function of content height
Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure
Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53
Cylindrical vessel: vertical: with two torispherical heads: filled volume: as a function of content height
Minimum thickness of: torispherical ends: under internal pressure
Cylindrical storage bin: with bottom cone: with torispherical top head: filled volume: as a function of content height
Cylindrical storage bin: with bottom cone: with ellipsoidal top head: filled volume: as a function of content height
Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Two cylinders in contact under load: axes at right angles: Hertz's theory
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius
Two cylinders in contact under load: parallel axes: Hertz's theory
Cylinder in contact in a cylindrical socket under load: Hertz's theory
Cylindrical vessel: vertical: with two ellipsoidal heads: filled volume: as a function of content height
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter
Cylindrical vessel: vertical: with two hemispherical heads: filled volume: as a function of content height
Cylindrical storage bin: with bottom cone: with flat top head: filled volume: as a function of content height
Cylindrical vessel: horizontal: with two torispherical heads: filled volume: as a function of content height
Cylindrical vessel: sloped: with two torispherical heads: filled volume: as a function of content height
Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure
Cylindrical vessel: vertical: with two spherically dished heads: filled volume: as a function of content height
Cylindrical vessel: sloped: with two hemispherical heads: filled volume: as a function of content height
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius
Minimum thickness of: ellipsoidal ends: under internal pressure
Cylinder in contact on a flat plate under load: Hertz's theory
Cylindrical vessel: sloped: with two ellipsoidal heads: filled volume: as a function of content height
Required thickness of conical shells: under internal pressure: Calculation based on outside diameter
Cylindrical vessel: horizontal: with two hemispherical heads: filled volume: as a function of content height
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection
Cylindrical vessel: sloped: with two spherically dished heads: filled volume: as a function of content height
Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53
Cylindrical vessel: horizontal: with two ellipsoidal heads: filled volume: as a function of content height
Required thickness of conical shells: under internal pressure: Calculation based on inside diameter
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Pressure stresses per BS5500 G.2.3.5.2(a): (radial load should not include pressure end load)
Cylindrical vessel: horizontal: with two spherically dished heads: filled volume: as a function of content height
Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure
Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53
Cylindrical vessel: vertical: with two torispherical heads: filled volume: as a function of content height
Minimum thickness of: torispherical ends: under internal pressure
Cylindrical storage bin: with bottom cone: with torispherical top head: filled volume: as a function of content height
Cylindrical storage bin: with bottom cone: with ellipsoidal top head: filled volume: as a function of content height
Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Two cylinders in contact under load: axes at right angles: Hertz's theory
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius
Register
Random example
Library (1554)
Beams (527)Frames (239)Arches (285)Pipes (90)Plates (299)Vessels (69)
Stability (30)
Columns (30)Other (15)
Search
Info/Howto
Contact us
RegisterSuggest a sheetTechnical supportAdministrativeWho we are
PREXCO srl
Via Primo Maggio, 10
I-46030 S.GIORGIO DI MANTOVA
Tel+39 03761536542
skype:prexco
