xcalcs
Search results
Your search for " cylinder " returned the following sheets:
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter
Two cylinders in contact under load: parallel axes: Hertz's theory
Cylinder in contact in a cylindrical socket under load: Hertz's theory
Cylindrical vessel: vertical: with two ellipsoidal heads: filled volume: as a function of content height
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter
Cylindrical vessel: vertical: with two hemispherical heads: filled volume: as a function of content height
Cylindrical storage bin: with bottom cone: with flat top head: filled volume: as a function of content height
Cylindrical vessel: horizontal: with two torispherical heads: filled volume: as a function of content height
Cylindrical vessel: sloped: with two torispherical heads: filled volume: as a function of content height
Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure
Cylindrical vessel: vertical: with two spherically dished heads: filled volume: as a function of content height
Cylindrical vessel: sloped: with two hemispherical heads: filled volume: as a function of content height
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius
Minimum thickness of: ellipsoidal ends: under internal pressure
Cylinder in contact on a flat plate under load: Hertz's theory
Cylindrical vessel: sloped: with two ellipsoidal heads: filled volume: as a function of content height
Required thickness of conical shells: under internal pressure: Calculation based on outside diameter
Cylindrical vessel: horizontal: with two hemispherical heads: filled volume: as a function of content height
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection
Cylindrical vessel: sloped: with two spherically dished heads: filled volume: as a function of content height
Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53
Cylindrical vessel: horizontal: with two ellipsoidal heads: filled volume: as a function of content height
Required thickness of conical shells: under internal pressure: Calculation based on inside diameter
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Pressure stresses per BS5500 G.2.3.5.2(a): (radial load should not include pressure end load)
Cylindrical vessel: horizontal: with two spherically dished heads: filled volume: as a function of content height
Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure
Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53
Cylindrical vessel: vertical: with two torispherical heads: filled volume: as a function of content height
Minimum thickness of: torispherical ends: under internal pressure
Cylindrical storage bin: with bottom cone: with torispherical top head: filled volume: as a function of content height
Cylindrical storage bin: with bottom cone: with ellipsoidal top head: filled volume: as a function of content height
Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Two cylinders in contact under load: axes at right angles: Hertz's theory
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius

 <-Forgotten?
Register
Random example
Library (1554)
Beams (527)
Frames (239)
Arches (285)
Pipes (90)
Plates (299)
Vessels (69)
API Std 650 (2)
ASME I A99 (9)
ASME VIII Div.1 (16)
BS 5500:1988 (1)
CODRES (1)
EJMA (1)
EN 13445-3:2002 (16)
Racc.VSR(it) (6)
WRC297 (2)
Volumes (15)
Stability (30)
Other (15)
Search
Info/Howto
Contact us

If you continue to use this site, we will assume that you accept the use of cookies for statistical and user friendliness purposes. To know more. European Union Directive