xcalcs
Suchergebnisse
Ihre Suche nach " cylinder " zurückgegeben die folgenden Blätter:
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Pressure stresses per BS5500 G.2.3.5.2(a): (radial load should not include pressure end load)
Required thickness of conical shells: under internal pressure: Calculation based on inside diameter
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter
Two cylinders in contact under load: parallel axes: Hertz's theory
Cylinder in contact in a cylindrical socket under load: Hertz's theory
Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure
Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter
Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53
Minimum thickness of: torispherical ends: under internal pressure
Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius
Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)
Minimum thickness of: ellipsoidal ends: under internal pressure
Two cylinders in contact under load: axes at right angles: Hertz's theory
Cylinder in contact on a flat plate under load: Hertz's theory
Required thickness of conical shells: under internal pressure: Calculation based on outside diameter
W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius
Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53

 <-Vergessen?
Anmelden
Beispiel (durch Zufall)
Bibliothek (1554)
Träger (527)
Rahmen (239)
Bögen (285)
Pipes (90)
Platten (299)
Vessels (69)
Stability (30)
Versch. (15)
Finden
Info/Neuh.
Was neu ist
Startseite
Preise
Hilfe
Wie zu
Anmelden
Links
Cookies
Zu uns schreiben

Wenn Sie fortfahren diese Seite zu nutzen, nehmen wir an, dass Sie die Verwendung von Cookies zu statistischen Zwecken und Benutzerfreundlichkeit akzeptieren. Um mehr zu erfahren. EU-Richtlinie