Suchergebnisse

Ihre Suche nach "
cylinder
" zurückgegeben die folgenden Blätter:

W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Pressure stresses per BS5500 G.2.3.5.2(a): (radial load should not include pressure end load)

Required thickness of conical shells: under internal pressure: Calculation based on inside diameter

Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter

Two cylinders in contact under load: parallel axes: Hertz's theory

Cylinder in contact in a cylindrical socket under load: Hertz's theory

Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure

Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)

Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter

Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53

Minimum thickness of: torispherical ends: under internal pressure

Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure

Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius

Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)

Minimum thickness of: ellipsoidal ends: under internal pressure

Two cylinders in contact under load: axes at right angles: Hertz's theory

Cylinder in contact on a flat plate under load: Hertz's theory

Required thickness of conical shells: under internal pressure: Calculation based on outside diameter

W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection

Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius

Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53

Required thickness of conical shells: under internal pressure: Calculation based on inside diameter

Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter

Two cylinders in contact under load: parallel axes: Hertz's theory

Cylinder in contact in a cylindrical socket under load: Hertz's theory

Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure

Piping, drums, and headers made from plate: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)

Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter

Piping, drums, and headers made from plate: No openings to reinforce per PG-52 or PG-53

Minimum thickness of: torispherical ends: under internal pressure

Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure

Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius

Piping, drums, and headers made from pipe: Reinforcement of openings in a definite pattern at equal pitch (or equitriangular arrangement)

Minimum thickness of: ellipsoidal ends: under internal pressure

Two cylinders in contact under load: axes at right angles: Hertz's theory

Cylinder in contact on a flat plate under load: Hertz's theory

Required thickness of conical shells: under internal pressure: Calculation based on outside diameter

W.R.C. Bulletin 297-Aug.84,Supplement to WRC Bulletin No. 107: Local Stresses in Cylindrical Shells Due to External Loadings on a Radial Flush Nozzle: Loads specified at nozzle/wall intersection

Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius

Piping, drums, and headers made from pipe: Plain end (unthreaded) pipe: No openings to reinforce per PG-52 or PG-53