xcalcs
Os resultados da pesquisa
Sua busca por " EN13445-3:2002 " devolvidos pelos seguintes exemplares:
Required thickness of conical shells: under internal pressure: Calculation based on inside diameter
Allowable external pressure: of cylindrical shells: circularity outside tolerance
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on outer diameter
Junction between the large end of a cone and a cylinder: with knuckle: cone and cylinder with constant thicknesses: under internal pressure
Minimum thickness of: torispherical ends: under internal pressure
Allowable external pressure: of cylindrical shells: circularity within tolerance
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on inner radius
Minimum thickness of: ellipsoidal ends: under internal pressure
Junction between the large end of a cone and a cylinder: without a knuckle: cone and cylinder with constant thicknesses: under internal pressure
Minimum thickness of cylindrical shells under internal pressure: e/De<=0.16: Calculation based on inner diameter
Required thickness of conical shells: under internal pressure: Calculation based on outside diameter
Calculation of: departure from the true circle: of: cylinders: cones: measurements at: 24 equispaced angular positions
Minimum thickness of: spherical shells: spherical parts of shells: hemispherical ends: central zone of torispherical ends: spherical knuckles of cones to cylinders: under internal pressure: e/De<=0.16: Calculation based on outer radius

 <-Esquecido?
Cadastrar-se
Exemplo aleatório
Biblioteca (1554)
Vigas (527)
Secções (44)
Viga simple (44)
Afilada (136)
Contínuas (20)
Curved (67)
Vigas curvadas (60)
Engast.-engast. (6)
Engast.-livre (6)
Fixo-sem flex (6)
Sem flexão (6)
Carga unif.
Carga distr.
Carga conc.
Momento de flexâo conc.
Torcedura conc.
Combi
Engast.-apoiado (6)
Sem flex.-apoiado (6)
Sem torc.-apoiado (6)
Fixo-sem torc. (6)
Fixo-sem torc. (6)
Sem torc. (6)
Circular anéis (7)
Large defo (18)
Bending+shear (24)
Flexão + compressão (45)
Flexão + tensão (45)
Held ends (39)
Elastic foundation (45)
Frames (239)
Arcos (285)
Pipes (90)
Plates (299)
Vessels (69)
Stability (30)
Other (15)
Pesquisa
Notícia/Que
Contate-nos

Se voce continuar a usar este site, vamos supor que voce aceitar o uso de cookies para fins estatísticos e de facilidade de utilizaçao. Para saber mais. Directiva da Uniao Europeia